How To Clean The High-Efficiency Filter On A Hp Printer
There are many styles of high efficiency filters, and different styles are used in different environments. In order to save the cost of enterprises to the greatest extent, many of them are required to be able to clean and reuse, for this requirement actually depends on the filter material of the high-efficiency filter, what kind of filter material determines whether the high-efficiency filter can be cleaned or not.
Whether the high efficiency filter can be cleaned mainly depends on what material it is made of and how the material can not be cleaned, then it can not be cleaned itself! The filter material of the high efficiency filter is mainly composed of fiberglass paper or PP material, and the filtration efficiency is between 90% 0.3um 99.999%. Because of its high filtration accuracy for dust particles, the filter paper is required to be high and must not be damaged, so the high efficiency filter can not be cleaned in the clean industry. Of course, if you have to clean, there is no problem, but washing can not be clean, not to mention that after washing, the whole high efficiency filter is already riddled with holes and can not be used!
Therefore, it is suggested that high-efficiency filter owners, if they want to clean the high-efficiency filter, it is better to put it on how to prolong the service life of the high-efficiency filter itself. In fact, it is not difficult to do this, just pay attention to the following points.
Do a good job in the maintenance of the junior high school effect filter in the front-end air conditioning fresh air unit, because the cost of the junior high school effect filter itself is much lower than that of the high efficiency filter, and it can also be cleaned properly and strictly abide by the replacement rules of the junior high school effect filter. the general primary effect filter will be changed in March and the medium effect filter in June.
Clean the fresh air duct regularly, for example, when the high efficiency filter is replaced for the first time, the supply air duct can be cleaned incidentally to reduce the burden of the high efficiency filter after replacement.