home black iconHome / HEPA Filters for Hospitals

HEPA Filters for Hospitals

HEPA filters in hospitals are common air filters to capture and remove airborne particles, including bacteria, viruses, allergens, and other contaminants. "HEPA" stands for High Efficiency Particulate Air.
These filters are known for their exceptional filtration capabilities that remove 99.97% of airborne particles that are 0.3 microns or larger. They are widely used in healthcare facilities, including hospitals, clinics, to maintain clean and sterile air environment.
Hospital grade HEPA filters are capable of trapping a wide range of microorganisms and particulate matter, helping to reduce the spread of infections and maintain a safe environment for patients, staff, and visitors.

Features of HEPA Air Filters for Hospitals:

· High filtration efficiency: can can remove at least 99.97% of dust, pollen, mold, and bacteria
· Reduce the risk of infection: can remove airborne pathogens from the air in areas where there is a high risk of infection, such as operating rooms
· High airflow capacity: low airflow resistance and air pressure drop
· Customizable sizes and shapes: fit your system perfectly

HEPA Hospital Air Filters Applications:

· Operating Rooms and Intensive Care Units (ICUs)
· Isolation Rooms
· Pharmaceutical Compounding Areas
· Laboratories

HEPA Filters for Hospitals

01 - 01

Go to Page

HEPA Air Filters for Hospitals FAQ

1. Why are HEPA filters used in hospitals?

HEPA filters are used in hospitals to maintain high air quality, control infections, and protect patients, especially in areas like operating rooms, ICUs, and isolation wards. They effectively remove airborne pathogens and other pollutants from the air, which is crucial in a healthcare setting.


2. How often should HEPA filters be changed in a hospital?

The frequency of changing HEPA filters in a hospital depends on several factors, including the filter’s usage, air quality, and manufacturer’s recommendations. Typically, it is advised to inspect them regularly and change them at least every 12 to 18 months. However, in high-risk areas, more frequent changes may be necessary.


3. Are HEPA filters reusable or washable?

No. Washing or reusing them can damage the filter’s structure and integrity, result in reduction of effectiveness. HEPA Air filters in hospitals or other healthcare facilities are usually replaced once they reach their capacity or end of life.


4. Do HEPA filters improve indoor air quality?

Yes, HEPA filters significantly improve indoor air quality by trapping airborne pollutants, allergens, and pathogens. This is particularly important in hospitals to prevent the spread of infections and protect the health of patients and staff.


5. What maintenance do HEPA filters require?

HEPA filters require regular inspections to ensure they are functioning correctly. This includes checking for damage, seal integrity, and filter saturation. They should be replaced according to the manufacturer’s manual or when they show signs of wear or decreased efficiency.


6. What air filters do hospitals use?

The choice of air filters in a hospital setting depends on the specific requirements of each area, such as operating rooms, patient wards, and general areas. HEPA filters, ULPA filters, activated carbon filters, pre-filters, and pleated filters are common air filters used in healthcare facilities.


7. Are all hospital air filters HEPA grade?

Not all air filters used in hospitals are HEPA grade. The use of HEPA filters is typically reserved for areas where the highest level of air filtration is necessary, such as operating rooms, ICUs, and isolation rooms. Other areas may use different filters based on the required filtration level.


Learn More +


Write inquiry here

reply within 6 hours,any questions are welcome!

    Drop files here or Select files

    Accepted file types: jpg, png, pdf, tiff , jpeg,doc, docx
    File size: 10 MB